Extreme Clean Air Test Reports

The testing, shown on page 10 in paragraph 2, represents two different test results. The first test in the graph introduces the surrogate virus into the room and turns on the IONaer 7000 (Extreme Clean Air) at the same time, resulting in a 99.82% reduction in 33 minutes. The second test allowed the IONaer 7000 (CleanAir EXP) to run for 10 minutes, then introduced the virus into the room, resulting in a 99.994% reduction within 10 minutes.
Test results show an 85.2% reduction within 30 minutes on stainless steel (non-porous surface).
Document indicates the size of the room in which the tests were performed. The size would be equal to a typical hospital room.
Depicts the results on E. coli, A. baummanii (mold), S. aureus (Staph), and non-enveloped viral surrogate Norovirus MS2.
Test results show an increase of decay rates, 260% faster, after installing IONaer 7000 (Extreme Clean Air).
Graphs of the live data illustrate the speed of particulate reduction in homes or businesses when the sensor sends the signal to activate the IONaer 7000 (Extreme Clean Air). Customers can access this data in real-time through the Extreme Clean Air App.
Test results show the IONaer 7000 (Extreme Clean Air) reduced the ambient ozone from 15 ppb to 5 ppb after 8 hours of operation @ 300 CFM.
Test results show the IONaer 7000 (Extreme Clean Air) reduced the ambient ozone from 12 ppb to 8 ppb after 8 hours of operation @ 1500 CFM.

Diagram illustrates the testing rig Underwriters Laboratories (UL) used for testing.